Solenoid Operated Directional Valve (DSW)
Feature:
1.Manufactured with brand new CNC minute lathe with precise specification. The spool is designed with no right angle in order to reduce the cutting edge, or sliding block problem while the pressure is high.
2.Interior resistance function increases severely.
3.Back pressure endurance increases severely.
4.Wet type solenoid design with stable action and low noise.
5.The coil is made integrally, and good in waterproof, dissipating heat and high temperature tolerated.
6.Installation follows international dimension regulation.
7.Attached with neon light for operating direction.
8.DIN Type plug-in connection has directional pilot at both sides.
Model Definition:
| DSW | -02 | -3C2 | -D | -AC110V |
| Model Series | Valve Size (inch) | Spool Type | Electrical Conduit Connection | Coil Type |
| Solenoid Operated Directional Valve | 02：1/4” 03：3/8” | Please Refer to Spool Type Table | B: Terminal Box Type D: Plug-In Connector Type | AC110V AC220V DC12V DC24V RF110V RF220V |
Specification:
| Model | Max. Flow (L/min) | Max. Operating Pressure (MPa) | Max. Back Pressure (MPa) | Max. Changeover Frequency (Times/min) | |
|
| DSW-02 | 60 | 35 | 7~16 | 240 | |
| DSW-03 | 100 | |
| Voltage/Current | Alternating Current | Direct Current | Radio Frequency |
| Rated Voltage ±10% | AC110V | AC220V | DC12V | DC24V | RF110V | RF220V |
| Holding Current ±10% | 0.6A | 0.3A | 2.6A | 1.3A | 0.38A | 0.19A |
| Inrush Current ±10% | 2.26A | 1.23A | - | - | - | - |
